fbpx

Using and looking after your tray and canopy

Using and looking after your tray and canopy

Powder coating

  1. To maintain both the aesthetic and functional properties of your powder coat, please ensure you are cleaning your tray and canopy on a regular basis. Allowing a build-up of dirt and grime will require more intense cleaning and is not good for the powder coated surface.
  2. Carefully remove any loose surface deposits with a damp sponge or cloth by gently rubbing. Do not rub powder coated surface excessively or with any abrasive materials.
  3. Scouring pads and scrapers should be avoided as well as any harsh solvents. A mild diluted detergent works best.
  4. Smooth or metallic finishes can be more prone to scratching and should be treated with greater care.
  5. Always test a small unseen area of the powder coat before cleaning with solvents
  6. Keep your tray and canopy undercover where possible, being exposed to constant weather conditions (including rain, sun and hail) will shorten the life of the powder coated surface.
  7. High levels of salt or pollutants from coastal or industrial areas may also shorten the life of the powder coated surface. Winds carrying air borne debris, such as salt, will have an abrasive and erosive effect. Cleaning should be done more frequently if your tray and canopy are exposed to these conditions.
  8. A powder coated tray can be damaged by heavy items or by an item rubbing against the surface. It is recommended that a rubber mat is used in on the tray floor and travel blankets/ padding etc are used when carrying a load

 

 

2 Pac paint

2 Pac paint should be maintained to the same standard as the paint on your vehicle body. Please wash regularly and polish as you would your vehicle.

 

Nuts and bolts

All nuts and bolts should be checked regularly and tightened if needed. If a fault occurs, please replace immediately.

 

Locks

All locks should be checked regularly and tightened if needed. If a fault occurs, please replace immediately.

 

Roller Bearings

All roller bearings should be checked and lubricated regularly and adjusted if needed. If a fault occurs, please replace immediately.

 

 

Draw slides

All draw slides should be checked regularly. If a fault occurs, please replace immediately.

 

Rubbers

All rubbers should be checked regularly. If a fault occurs, please replace immediately.

 

Water tanks

Your water tank has a 2 way valve, simply connect to a hose to fill slowly.

 

 

The above maintenance should be carried out after the first 500kms or 3 months of taking delivery of your tray and/or canopy, whichever comes first.

This is a service that can be carried out by Hunted Engineering, please get in contact with us for a service

After this time please check and maintain the above in line with your regular vehicle servicing and maintenance

10 Peterkin Pl,
Alexandra VIC 3714

CONNECT

Contact Us

(03) 5772 2132
+61 427 937 404

enquiries@huntedengineering.com.au

 

 

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Apply Coupon
      Unavailable Coupons
      afterpay15 Get 15% off
      eofy15 Get 15% off